Service Hotline:

+86-137 0285 5825 

You are here:HOME >> Products >> PRESS FEEDER EQ... >> 2 IN 1 (Uncoile...

Products

Products

News

2 IN 1 (Uncoiler-Straightener)

Thick-Plate Decoiler And Straightener



The thick-plate decoiler and straightener integrates uncoiling and leveling functions. The uncoiling speed is controlled by a photoelectric switch, and there is no damage to the surface of the material during operation.



  • Device Description:                                                                                                                

    The thick-plate decoiler and straightener integrates uncoiling and leveling functions. The uncoiling speed is controlled by a photoelectric switch, and there is no damage to the surface of the material during operation.

    Suitable for uncoiling and straightener of 1.0-6.0mm thick plate materials. The main shaft adopts hydraulic expansion system. The tensioning material has large tensioning force and good safety.

    combined decoiler with Straightener

    Unique Advantages:                                                                                                                   

    Stamping users are very fond of the decoiler and straightener. The decoiler and straightener integrates the material rack and the straightener machine, which greatly saves floor space. The price is moderate and cost-effective. It is equipped with a stamping production line. Commonly used equipment. 

    Features:                                                                                                                                      

    1. 7 leveling rollers (arranged on 4/3 of 85), made of high-strength rolling bearing steel GCr15, after quenching and tempering treatment, frequency modulation quenching treatment, the surface hardness can reach HRC60~62° after hard chromium plating, and the dimensional accuracy can reach 0.01mm , To ensure high-precision leveling.

    2. Feeding and loosening adopts pneumatic compression and loosening, which can generate enough pulling force to send the material to the leveling roller and rotate synchronously.



    3. A folding device is installed at the front end of the leveling feed roller, and the movable roller is pulled by the air cylinder. When the material is fed for the first time, the material head is bent and flattened before being sent to the straightening machine.

    4. The leveling drum adopts a larger power motor (5-16HP) with a worm gear reducer (30:1), which is transmitted to the leveling material of the leveler with a sprocket and chain, which can generate a larger leveling force, which is controlled by the inverter The running speed of the motor is convenient and reliable.




    5. The upper and lower leveling rollers adopt large-modulus gear synchronous transmission, and the leveling force is large, and the surface of the material is not rubbed, and the material is not scratched. The fine-tuning part adopts the worm-gear fine-tuning device. The adjustment accuracy is high, the pressure is large, and the operation is convenient.

     

    Technical Parameter:                                                                                                                      

     

    Material thickness [mm]

    1.0~6.0

    Inner diameter of coil [mm]

    460-530

    Coil outer diameter [mm]

    1500

    Leveling roller [mm]

    up 4 down 5

    Adjustment method

    turbo worm

    Leveling speed [m/min]

    0~15

    Material rack expansion method

    manual

    Induction method

    Induction rack type

    Power supply voltage

    AC380V

     

  • Or use the form below to contact us:

    *

    *

    *

    *

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales