Service Hotline:

+86-137 0285 5825 

You are here:HOME >> Products >> COIL SLITTING M... >> Coil Slitting L...

Products

Products

News

Coil Slitting Line

Double Slitter Base For Coil Slitting Machine

Coil Slitting Machine Description:

KINGREAL Coil slitting line is suitable for carbon steel, stainless steel, pre-painted/coated coils, etc. Thickness up to 3mm, maximum width up to 2000mm and maximum speed up to 250 m/min.



  • Coil Slitting Machine Description:

    KINGREAL Coil slitting line is suitable for carbon steel, stainless steel, pre-painted/coated coils, etc. Thickness up to 3mm, maximum width up to 2000mm and maximum speed up to 250 m/min.


    Slitting line machine consists of an uncoiler with a coil car, a clamping and shearing device, a high-precision slitter for quick exchange, a waste rewinder, a side guide, a winding machine, a tensioning device, and a hydraulic winder with the coil car.

     

    Applicable Materials:

    Cold rolled steel coils, hot rolled carbon steel coils, stainless steel coils, copper, brass, aluminium and silicon steel and many more other materials are also suitable for processing on this line.

     

    The process of change the slitter:

    If a slitting line has a slitting head on a line, the operator must arrange the slitting knives and spacers on the line:

    - Hydraulic cylinder pushes operator side slitting frame out

    - Install slitting knives, spacers and rubber pads on the double slitting spindle.

    - Pull the slitting frame back to connect with the double spindle and press down mechanism.


    This part replacement process takes about 2 hours, obviously for a busy production factory, time is very precious
    . To solve this problem, KINGREAL have double head replaceable slitting machine, we call it "double slitting head" ” or “Twin Slitter Head”.

    While one slitting head is slitting on the production line, operators can install knives and spacers on the other slitting head.

     

    High Speed Twin Slitter head change slitting line introduction:

     

    Variation from one slitting head to the other: one undercarriage for a double slitting head walks on longitudinal rails, the in-line slitting head goes on the undercarriage, the undercarriage moves the other slitting head facing Slitting on the line position, then the other head moves to the line position, the exchange only takes 30 minutes.

     

    The double slitting heads can be the same, or one can be larger and the other smaller. Larger slitters are suitable for slitting of larger thicknesses, while smaller slitters are suitable for slitting of small thicknesses. In this way, high-precision, high-efficiency performance is achieved.

     

    Double slitting heads increase the flexibility and efficiency of the slitting line and are very popular with large steel mills that require large volumes of slitting coil.

     

    Process flow:

    Winding → unwinding → clipping and shearing → winding → guiding → slitting → winding edge material → winding → tension → winding → unloading of small rolls → packaging

    The main slitting line parameters suitable for this unit:

    Material of raw materials

    stainless steel, cold-rolled steel.

    Raw material thickness

     0.2mm-2.0mm

    Raw material width

    300-1550mm

    Raw material roll inner diameter

    Φ508mm

    Raw material roll outer diameter

    ≤Φ1800mm

    Raw material volume weight

     ≤12 tons

    Slitting speed

     0-80m/min (normal working)

    Total power

    about 150KW

    Floor area

    about 18m × 6m

     

    KINGREAL service

    Provide technical design and solutions for demand;

     Machine and equipment quality assurance

    Supply accessories at any time;

    Remote technical consultation and service;

    Other special technical services provided according to customer requirements




  • Or use the form below to contact us:

    *

    *

    *

    *

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales