Service Hotline:

+86-137 0285 5825 

You are here:HOME >> Products >> CUT TO LENGTH L...

Products

Products

News

CUT TO LENGTH LINE

Electric Plate Shearing Machine

This line is a set of automatic equipment with cutting edge and slitting, automatic cut-to-length.
The unit can uncoil, level and cut the steel coils into different lengths of flat plates and automatically stack the cut plates neatly.
Its main working host is composed of several main parts such as uncoiler, slitter, sizing machine, shear, conveyor, embosser and stacking device.


  • This line is a set of automatic equipment with cutting edge and slitting, automatic cut-to-length.
    The unit can uncoil, level and cut the steel coils into different lengths of flat plates and automatically stack the cut plates neatly.
    Its main working host is composed of several main parts such as uncoiler, slitter, sizing machine, shear, conveyor, embosser and stacking device.

    The leveling and cross-cutting unit can uncoil, level and shear various rolls into different lengths of plates.
    Equipment composition
    The whole set is mainly composed of uncoiling frame, leveling machine, servo system, shearing machine, auxiliary device and control panel.







    Workflow 
    Coiling → uncoiling → pre-straightening → buffering → fine straightening feeding → cross-cutting → stacking → plate cutting

    Main components.
    ● Coil carriage
    ● Uncoiler 
    ● Stripper entry table
    ● Mandrel uncoiler
    ● Side guides
    ● Straightening machine
    ● Measuring table
    ● Hydraulic shears
    ● Conveyor
    ● Pneumatic stacker
    ● Unloading tables
    ● Hydraulic and pneumatic systems
    ● Pneumatic systems
    ● Electrical system



    1. 7-inch oversized Mitsubishi touch screen control with dual control of keypad and touch screen. The screen instructions are clear and simple to operate.

    2. The PLC operation panel is in a separate electric box, which completely avoids the negative impact of punch vibration on feeding accuracy and ensures high precision feeding.

    3. Serrated CNC feeding machine has memory function. When the feeder suddenly loses power or needs to interrupt production due to special circumstances, there is no need to re-measure the program when restarting production. Simply press the reset button and it will run again. Simplify the operation procedure.

    4. There are two types of relaxation: two ends relaxation and one by one relaxation. One machine can be used for different stamping processes.

    5. Advanced automatic diagnosis system, when the operation is faulty, the system can self-diagnose and display the error information in detail.

    6. It has two feeding methods, pointing and continuous feeding. It can be mixed operation, X-axis (single axis) can work independently, or X-axis and Y-axis can be linked, or both axes can be fed alternately. Save material cost.

    7. High precision: In the process of continuous feeding, the minimum distance between the edge and the side can be set within 0.4mm, and the error of each movement can be guaranteed within ±0.05mm. Machine, hydraulic wire drawing machine, forming machine, laser cutting machine.




    Main configuration 
    1、Operating system is Siemens.
    2、The guide rail and ball screw are Taiwan PMI, and the edge guide rail is carbide bushing structure.
    3、The bearing is Germany FAG.
    4、Key indicator is Germany Merle.
    5、Inflatable cement is Japan SMC and Taiwan AirTAC.
    6、The main parts of control cabinet, circuit breaker and relay are Schneider.
    7、Power is Taiwan MW.
    8、The knife is carbide knife.
    9、Other asynchronous motors are SIEMENS products, punching and shearing servo, frequency conversion speed control device is DELTA or Huichuan.
    10、Other structural parts are non-standard design and manufacture for our company. 





    FAQ:
    1. what information is needed to prepare a quotation.
    1. Coil thickness (min-max) 
    2. Coil width (min-max) 
    3. the type of material you have
    4. the weight of your rolls (max)
    5. How many tons do you need per day or per month?

    2. Do you have after-sales support?
    Yes, we are happy to provide advice and we have skilled technicians. Our technicians will come to your factory on time to help you.

    3. How do your machines compare with other big companies in this market?
    We have the latest technology and a lot of experience with machines and global markets. We have a team of professional engineers and after-sales service team.

    4. Once we buy a machine from you, can you provide materials?
    We can help you find the right material for your machine.

    5. Are you a trading company or a manufacturer?
    We are a factory. 6.

    6. How long is your delivery time?
    If the goods are in stock, it is usually 5-10 days. Or 15-20 days, if the goods are not in stock, depending on the quantity.

    7. Do you provide samples? Is it free or extra?
    Yes, we can provide samples for free, but we don‘t pay the shipping cost.

    8. Can you make it according to the customer‘s drawing?
    Yes, we can make it.




  • Or use the form below to contact us:

    *

    *

    *

    *

Online Now #
  • +86-137 0285 5825 
  • sales@kingreal.org
  • jet-clima jet-clima
  • 952688242Sales