How to Maintain the Coil Slitting Machine
1. Application scope of coil slitter:
Coil slitting machine often use for slitting metal coils such as slitting strips, stainless steel, copper... It is mainly used in steel processing plants, steel rolling manufacturers, electrical appliance industries, automobiles, stamping parts, etc. Many customers who buy coil slitting machine from us will ask us how to maintain the slitting machines. Kingreal will introduce it to you below, hoping to help everyone.
2. Operation precautions:
1. During use, you should always pay attention to observe whether each component is operating normally and whether there are any abnormal sounds. Once it occurs, stop it in time, find the cause and eliminate it;
2. Slowly increase the speed when starting up. The gap should not be too large. If it is too large, there will be burrs. If it is too small, it will damage the blade.
3. Note: The coil slitting machine should be grounded before use to prevent electric shock.
3.Routine maintenance:
1. Remove foreign matter, dust and oil on the blade, tool holder, tool holder and sliding guide post.
2. Lubricate the transmission chain and gears regularly every half month, and check the screws to prevent them from loosening and damaging the machine.
3. Check the chain and transmission belt regularly every month to see if they are loose.
4. When the coil slitting machine is not working, use a towel or soft cloth to wipe the surface of the machine to keep it clean.
5. When the slitting machine is idle, seal the blades, tool holders, etc. with oil, and apply oil to the electroplated parts to prevent corrosion.
+86-137 0285 5825 
sales@kingreal.org
jet-clima