Auto Press Feeding and Transfer System is applicable for products of a large output, and can replace a lot of repetitive work. Multiple pneumatic presses can be operated in parallel in the same automatic production line, or a single machine can be used for work separately.
Features and Structure: 
Technical Specifications :
|
Model |
KMD-120 |
KMD-150 |
KMD-180 |
KMD-230 |
|
Feed Stroke |
1000-1200 |
1200-1500 |
1600-2000 |
2000-2500 |
|
Vertical Stroke |
0-60mm |
|||
|
Cycle Time |
3.3Sec |
3.8Sec |
4.2Sec |
4.8Sec |
|
Maximum Quality Transferred |
3.0kg |
4.0kg |
5.0kg |
6.0kg |
|
Power of Driving Motor |
7.5kw |
11kw |
11kw |
15kw |
|
Sorption Mode |
Vacuum Chuck/Electromagnet |
|||
|
Feed Precision |
±0.3mm |
|||
|
Driving Mode |
Servo Motor |
|||
|
Basic Number of Stamping Machines Connected |
5Sets |
|||
Auto plate material feeder / Uploader system : 1. Driving system applies precise rotary-cam or Servo Motor, easy to adjustable speed.
2. Suitable for Vacuum or Magnet. Or Pneumatic clamps when pick up material or products.
3. Feeding manner, Roll-Materials may comply with Air-feeder or N.C roll feeder. Sheet-material can comply double material-stack machine.
Plate Material Feeding System :
-Features and Structure:
1.PLC control and servo motor driving is adopted for feeding, to guarantee the feeding accuracy.
2.The feed stroke can be set flexibly, and the operation is simple and safe.
3.It is applicable for both thick and thin materials, and can replace manual feed, to solve the lack of labors.
4.The system and the stamping machine are automatically linked, thus there is high flexibility and no man-made negligence, so as to improve the production efficiency.
-Main Specifications (Unit: mm):
|
Model |
KSD-25/25T |
KSD-35/35T |
KSD-50/50T |
|
Material Width |
Max：250 |
Max：350 |
Max：500 |
|
Material Length |
1000-1500 |
||
|
Material Thickness |
1.0~8.0 |
||
|
Material-collecting Height |
400 |
||
|
Feed Stroke |
0-999 |
||
|
Feed Precision |
L=100±0.05 |
||
|
Mode of Operation |
Buttons and Touch Screen |
||
Plate Material Feeding System Features and Structure :
1.PLC control and servo motor driving is adopted for feeding, to guarantee the feeding accuracy
2.The feed stroke can be set flexibly, and the operation is simple and safe.
3.It is applicable for both thick and thin materials, and can replace manual feed, to solve the lack of labors
4.The system and the stamping machine are automatically linked, thus there is high flexibility and no man-made negligence, so as to improve the production efficiency.
+86-137 0285 5825 
sales@kingreal.org
jet-clima