How to Install NC Servo Feeder on Stamping Press

In today‘s manufacturing industry, technology is changing, especially in automotive, metal stamping technology more and more demanding of high precision, high efficiency, for the selection of automation equipment is indispensable,KINGREAL MACHINERY R & D center according to market demand, More than 10 years of production, sales and service experience, developed into feed machine, three-in-one feeder, press automatic feeder, NC servo feeder, roller feeder series products to meet the majority of the hardware manufacturing industry, batch production and automation produce.

 

NC servo feeder is now more high-end, high precision, easy to use most of a, NC feeder is how to install it on the punch, the following billion-free installation steps, we carefully optimistic.

High-speed punch feeder installation:

1. on the punch table side, according to the installation board to set the location and size of drilling four holes, the mounting plate will be fixed on it;

2. Lift the main body part with the slings and press the key between the positive slide plate and the mounting plate and fasten the main body to the mounting plate with two matching screws.

3. When the feed height level is not consistent with the die pressure, the NC feeder slide will have about 100mm of adjustment can be adjusted at this time can slide the two bolts loose, adjust the fixed board mounting bolts, then Can change the horizontal position of the feeder, to the appropriate location, the screws fastening;

4. Fix the mold, make the mold perpendicular to the direction of the roller, and install the loose position on the punch slide. (Note: If there is a distance between the prying board and the lower mold when punching the thin material, Installed, do not use the principle of bending the material, with the mold fixed to the wheel with the vertical, or material will be skewed, feeding a negative force, resulting in sent from the length of different);

5. Install the electric control box and proximity switch on the appropriate part of the press and check whether it is working properly.

The above information provided by the KINGREAL Machinery punch servo feeder year warranty for one year, buy peace of mind with the rest assured that after-sales within 24 hours to solve the near future, within 48 hours to solve the province, quality and service are guaranteed , Zero risk. 18-year R & D and production, free automated production line program, site installation, life-long after-sale, free test machine! . .