The Details that Need Attention in the use of Slitting Production Line
Steel coil slitting processing line is the metal coil cut into the required width of the strip, and then the strip will be collected into small volumes for the next process, is the transformer, motor industry and other metal strip precision shear necessary equipment.
Longitudinal shear with its own excellent quality and good performance by the majority of users, then there are some details that need to be noted when installing the steel plate longitudinal shear processing line.
1. After the power should be paid close attention to the facility abnormalities should be immediately shut down, and appropriate treatment.
2. Uncoiling and leveling shear line in the process of high-speed operation cannot be reversed or selected positive, to stop the machine first; stop after the selection of positive and negative rotation; in the time of rolling material, pay attention to the plate material cannot touch the power cord, the effective protection of the wire to prevent scratching.
3. To have a sense of safety, pay attention to life safety, non-staff is strictly prohibited near the running facilities.
4. When the facility is running, no one is allowed to cross the rotating sheet.
5. The slitting production line must be cleaned with gasoline before each knife and the upper and lower shafts.
6. The facility is regularly checked every Wednesday and Saturday to see if all fastening bolts are loose and appropriate measures are taken.
7. On a daily basis to uncoil leveling shear line for a series of maintenance, in places where there is grease nozzle, you can add oil once a month. It plays a role in the bearing lubrication!
8. To pay attention to the cleanliness of the roll surface, not to be able to have welding slag and short plate material, after other things fall into the roll between, may damage the leveling machine.
+86-137 0285 5825 
sales@kingreal.org
jet-clima