What Are the Technical Parameters of The Production Line?

The thickness, weight, width, length and speed of the uncoiling and leveling shearing production line need attention. The main electric control components and hydraulic components are equipped with foreign imported products, with high working reliability; the control system has strong anti-interference ability, with self-diagnosis function, which can help to quickly inquire the cause of failure.

This production line has smooth and reliable movement, low noise, easy and reliable maintenance. The production line takes full consideration of human-machine safety and takes reliable protection measures to prevent mis operation.




Processing thickness: according to the customer‘s needs, the thickness requirements for metal stainless steel sheets are different, so each flattening machine has an upper and lower limit of processing thickness, exceeding which will cause poor shearing and even damage to the tool.

Processing weight: according to the weight of the customer coil, for the uncoiler bearing important is not the same, so the uncoiler is generally an upper limit, if the steel coil is overweight, the loading trolley cannot operate, and even damage to the cylinder.

Processing width: the width of the coil material varies according to the customer‘s requirements, there are generally upper and lower limits, over the upper limit cannot be on the coil, over the lower limit cannot be centered.

Processing length: there is a limit to the length required after processing of the coil material, generally there are upper and lower limits, beyond which the material cannot be stomped.

Processing speed: the entire open flat cross-cut slitting line between the speed of each host also has certain requirements. There are wearing belt speed, uniform speed, variable speed of the rate, mainly affects the processing efficiency.

Automatic flattening machine, mainly for thin plate, medium plate design and manufacture, after uncoiling and leveling shear, become the required length of flat plate, using full computer control, hydraulic system composition, while according to the thickness of the plate village, between each machine is equipped with a pendulum intermediate bridge, correction device, etc.